/*---------------------------------------------------------------------------*\ ========= | \\ / F ield | OpenFOAM: The Open Source CFD Toolbox \\ / O peration | Website: https://openfoam.org \\ / A nd | Version: 8 \\/ M anipulation | \*---------------------------------------------------------------------------*/ Build : 8 Exec : blockMesh -dict system/blockMeshDict -case /home/eichler/Helyx/Ford-serial Date : Jun 04 2023 Time : 10:51:47 Host : "latticeNTBK" PID : 12221 I/O : uncollated Case : /home/eichler/Helyx/Ford-serial nProcs : 1 sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE). fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10) allowSystemOperations : Allowing user-supplied system call operations // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // Create time Creating block mesh from "system/blockMeshDict" Creating block edges No non-planar block faces defined Creating topology blocks Creating topology patches Reading patches section Creating block mesh topology Reading physicalType from existing boundary file Default patch type set to empty Check topology Basic statistics Number of internal faces : 0 Number of boundary faces : 6 Number of defined boundary faces : 6 Number of undefined boundary faces : 0 Checking patch -> block consistency Creating block offsets Creating merge list . Creating polyMesh from blockMesh Creating patches Creating cells Creating points with scale 1 Block 0 cell size : i : 0.1 .. 0.1 j : 0.1 k : 0.1 .. 0.1 Writing polyMesh ---------------- Mesh Information ---------------- boundingBox: (0 -2.5 0) (10 2.5 2) nPoints: 108171 nCells: 100000 nFaces: 308000 nInternalFaces: 292000 ---------------- Patches ---------------- patch 0 (start: 292000 size: 1000) name: ffminx patch 1 (start: 293000 size: 1000) name: ffmaxx patch 2 (start: 294000 size: 2000) name: ffminy patch 3 (start: 296000 size: 2000) name: ffmaxy patch 4 (start: 298000 size: 5000) name: ffminz patch 5 (start: 303000 size: 5000) name: ffmaxz End /*---------------------------------------------------------------------------*\ ========= | \\ / F ield | OpenFOAM: The Open Source CFD Toolbox \\ / O peration | Website: https://openfoam.org \\ / A nd | Version: 8 \\/ M anipulation | \*---------------------------------------------------------------------------*/ Build : 8 Exec : snappyHexMesh -overwrite -case /home/eichler/Helyx/Ford-serial Date : Jun 04 2023 Time : 10:51:48 Host : "latticeNTBK" PID : 12223 I/O : uncollated Case : /home/eichler/Helyx/Ford-serial nProcs : 1 sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE). fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10) allowSystemOperations : Allowing user-supplied system call operations // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // Create time Create mesh for time = 0 Read mesh in = 0.28 s Overall mesh bounding box : (0 -2.5 0) (10 2.5 2) Relative tolerance : 1e-06 Absolute matching distance : 1.135781669e-05 Reading refinement surfaces. Read refinement surfaces in = 0.17 s Reading refinement shells. Read refinement shells in = 0 s Setting refinement level of surface to be consistent with shells. Checked shell refinement in = 0 s Reading features. Read features in = 0 s Determining initial surface intersections ----------------------------------------- Edge intersection testing: Number of edges : 308000 Number of edges to retest : 308000 Number of intersected edges : 1520 Calculated surface intersections in = 0.35 s Initial mesh : cells:100000 faces:308000 points:108171 Cells per refinement level: 0 100000 Adding patches for surface regions ---------------------------------- Patch Type Region ----- ---- ------ ford_modified_3: 6 wall ford_modified_3 Added patches in = 0.01 s Selecting decompositionMethod none Layer thickness specified as final layer and expansion ratio. Refinement phase ---------------- Found point (2.479721894 -0.462757982 0.6825150122) in cell 32024 on processor 0 Surface refinement iteration 0 ------------------------------ Marked for refinement due to surface intersection : 1693 cells. Determined cells to refine in = 0.36 s Selected for refinement : 1693 cells (out of 100000) Edge intersection testing: Number of edges : 346439 Number of edges to retest : 47747 Number of intersected edges : 6146 Refined mesh in = 0.24 s After refinement surface refinement iteration 0 : cells:111851 faces:346439 points:122902 Cells per refinement level: 0 98307 1 13544 Surface refinement iteration 1 ------------------------------ Marked for refinement due to surface intersection : 71 cells. Determined cells to refine in = 0.01 s Selected for refinement : 71 cells (out of 111851) Edge intersection testing: Number of edges : 347828 Number of edges to retest : 6857 Number of intersected edges : 6155 Refined mesh in = 0.2 s After refinement surface refinement iteration 1 : cells:112348 faces:347828 points:123298 Cells per refinement level: 0 98236 1 14112 Surface refinement iteration 2 ------------------------------ Marked for refinement due to surface intersection : 0 cells. Determined cells to refine in = 0.01 s Selected for refinement : 0 cells (out of 112348) Stopping refining since too few cells selected. Removing mesh beyond surface intersections ------------------------------------------ Found point (2.479721894 -0.462757982 0.6825150122) in global region 0 out of 89 regions. Keeping all cells in region 0 containing point (2.479721894 -0.462757982 0.6825150122) Selected for keeping : 110559 cells. Edge intersection testing: Number of edges : 343192 Number of edges to retest : 2338 Number of intersected edges : 6155 Shell refinement iteration 0 ---------------------------- Marked for refinement due to distance to explicit features : 0 cells. Marked for refinement due to refinement shells : 0 cells. Determined cells to refine in = 1.15 s Selected for internal refinement : 0 cells (out of 110559) Stopping refining since too few cells selected. Dangling coarse cells refinement iteration 0 -------------------------------------------- Determined cells to refine in = 0.01 s Selected for refinement : 20 cells (out of 110559) Edge intersection testing: Number of edges : 343492 Number of edges to retest : 2234 Number of intersected edges : 6158 Refined mesh in = 0.24 s After refinement coarse cell refinement iteration 0 : cells:110699 faces:343492 points:122207 Cells per refinement level: 0 98072 1 12627 Dangling coarse cells refinement iteration 1 -------------------------------------------- Determined cells to refine in = 0 s Selected for refinement : 0 cells (out of 110699) Stopping refining since too few cells selected. Dangling coarse cells refinement iteration 0 -------------------------------------------- Determined cells to refine in = 0 s Selected for refinement : 0 cells (out of 110699) Stopping refining since too few cells selected. Splitting mesh at surface intersections --------------------------------------- Introducing baffles for 6158 faces that are intersected by the surface. Edge intersection testing: Number of edges : 349623 Number of edges to retest : 34155 Number of intersected edges : 12289 Created baffles in = 0.25 s After introducing baffles : cells:110699 faces:349623 points:122207 Cells per refinement level: 0 98072 1 12627 Introducing baffles to block off problem cells ---------------------------------------------- markFacesOnProblemCells : marked 6837 additional internal faces to be converted into baffles. Analyzed problem cells in = 0.12 s Introducing baffles to delete problem cells. Edge intersection testing: Number of edges : 356460 Number of edges to retest : 24395 Number of intersected edges : 12289 Created baffles in = 0.23 s After introducing baffles : cells:110699 faces:356460 points:122207 Cells per refinement level: 0 98072 1 12627 Remove unreachable sections of mesh ----------------------------------- Keeping all cells in region 0 containing point (2.479721894 -0.462757982 0.6825150122) Selected for keeping : 106508 cells. Edge intersection testing: Number of edges : 332437 Number of edges to retest : 0 Number of intersected edges : 4903 Split mesh in = 1.69 s After subsetting : cells:106508 faces:332437 points:118740 Cells per refinement level: 0 98070 1 8438 Handling cells with snap problems --------------------------------- Introducing baffles for 4903 faces that are intersected by the surface. Edge intersection testing: Number of edges : 332437 Number of edges to retest : 17185 Number of intersected edges : 4903 Created baffles in = 0.3 s After introducing baffles : cells:106508 faces:332437 points:118740 Cells per refinement level: 0 98070 1 8438 Introducing baffles to block off problem cells ---------------------------------------------- markFacesOnProblemCells : marked 64 additional internal faces to be converted into baffles. Analyzed problem cells in = 0.23 s Introducing baffles to delete problem cells. Edge intersection testing: Number of edges : 332501 Number of edges to retest : 341 Number of intersected edges : 4903 Created baffles in = 0.39 s After introducing baffles : cells:106508 faces:332501 points:118740 Cells per refinement level: 0 98070 1 8438 Remove unreachable sections of mesh ----------------------------------- Keeping all cells in region 0 containing point (2.479721894 -0.462757982 0.6825150122) Selected for keeping : 106478 cells. Edge intersection testing: Number of edges : 332321 Number of edges to retest : 0 Number of intersected edges : 4852 Split mesh in = 2.79 s After subsetting : cells:106478 faces:332321 points:118719 Cells per refinement level: 0 98070 1 8408 Merge free-standing baffles --------------------------- freeStandingBaffles : detected 245 free-standing baffles out of 547 freeStandingBaffles : detected 16 planar (within 30 degrees) free-standing baffles out of 245 Detected free-standing baffles : 16 Edge intersection testing: Number of edges : 332305 Number of edges to retest : 16 Number of intersected edges : 4836 Introducing baffles to block off problem cells ---------------------------------------------- markFacesOnProblemCells : marked 18 additional internal faces to be converted into baffles. Analyzed problem cells in = 0.66 s Introducing baffles to delete problem cells. Edge intersection testing: Number of edges : 332323 Number of edges to retest : 99 Number of intersected edges : 4836 Created baffles in = 0.43 s After introducing baffles : cells:106478 faces:332323 points:118719 Cells per refinement level: 0 98070 1 8408 Merged free-standing baffles in = 0 s dupNonManifoldPoints : Found : 589 non-manifold points (out of 118719) Edge intersection testing: Number of edges : 332323 Number of edges to retest : 0 Number of intersected edges : 4836 Detected unsplittable baffles : 53 Edge intersection testing: Number of edges : 332270 Number of edges to retest : 53 Number of intersected edges : 4783 Keeping all cells in region 0 containing point (2.479721894 -0.462757982 0.6825150122) Selected for keeping : 106470 cells. Edge intersection testing: Number of edges : 332222 Number of edges to retest : 0 Number of intersected edges : 4772 Merged free-standing baffles in = 3.82 s. Merge refined boundary faces ---------------------------- Merging 0 sets of faces. No faces merged ... Merging all points on surface that - are used by only two boundary faces and - make an angle with a cosine of more than 0.7071067812. No straight edges simplified and no points removed ... Refined mesh : cells:106470 faces:332222 points:119289 Cells per refinement level: 0 98070 1 8400 Writing mesh to time constant Wrote mesh in = 1.07 s. Mesh refined in = 14.2 s. Morphing phase -------------- Snapping to features in 10 iterations ... Constructing mesh displacer ... Using mesh parameters { maxNonOrtho 65; maxBoundarySkewness 20; maxInternalSkewness 4; maxConcave 80; minFlatness 0.5; minVol 1e-13; minTetQuality 1e-15; minArea -1; minTwist 0.02; minDeterminant 0.001; minFaceWeight 0.05; minVolRatio 0.01; minTriangleTwist -1; nSmoothScale 4; errorReduction 0.75; relaxed { maxNonOrtho 75; } } Checking initial mesh ... Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Detected 0 illegal faces (concave, zero area or negative cell pyramid volume) Checked initial mesh in = 0.76 s Smoothing patch points ... Smoothing iteration 0 Found 1139 non-manifold point(s). Scaling iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Successfully moved mesh Smoothing iteration 1 Found 0 non-manifold point(s). Scaling iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Successfully moved mesh Smoothing iteration 2 Found 0 non-manifold point(s). Scaling iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Successfully moved mesh Patch points smoothed in = 2.43 s Morph iteration 0 ----------------- Calculating patchDisplacement as distance to nearest surface point ... Wanted displacement : average:0.01166773836 min:2.402112883e-07 max:0.05696649086 Calculated surface displacement in = 0.04 s Detecting near surfaces ... Overriding nearest with intersection of close gaps at 1673 out of 5215 points. Overriding displacement on features : implicit features : false explicit features : true multi-patch features : false Detected 212 baffle edges out of 10468 edges. Initially selected 2465 points out of 5215 for reverse attraction. Selected 4185 points out of 5215 for reverse attraction. Stringing feature edges : changed 0 points Attraction: linear : max:(-0.03147345346 -0.04389561196 -0.01810464192) avg:(-0.0003029835835 0.0002819800947 0.0006860594395) feature : max:(0 0 0) avg:(0 0 0) Feature analysis : total master points:5215 attraction to : feature point : 0 feature edge : 0 nearest surface : 0 rest : 5215 --> FOAM Warning : Displacement (-0.0004277235413 -8.614382423e-05 -4.777370023e-06) at mesh point 116252 coord (3.339040451 -0.2041558338 0.451304942) points through the surrounding patch faces Smoothing displacement ... Iteration 0 Iteration 10 Iteration 20 Displacement smoothed in = 0.45 s Moving mesh ... Iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Successfully moved mesh Moved mesh in = 0.7 s Morph iteration 1 ----------------- Calculating patchDisplacement as distance to nearest surface point ... Wanted displacement : average:0.01123234157 min:3.154023008e-06 max:0.05645983602 Calculated surface displacement in = 0.04 s Detecting near surfaces ... Overriding nearest with intersection of close gaps at 1743 out of 5215 points. Overriding displacement on features : implicit features : false explicit features : true multi-patch features : false Detected 205 baffle edges out of 10468 edges. Initially selected 2450 points out of 5215 for reverse attraction. Selected 4176 points out of 5215 for reverse attraction. Stringing feature edges : changed 0 points Attraction: linear : max:(-0.03099585515 -0.04351646562 -0.01825615695) avg:(-0.0002908749828 0.0002862978501 0.0006049937998) feature : max:(0 0 0) avg:(0 0 0) Feature analysis : total master points:5215 attraction to : feature point : 0 feature edge : 0 nearest surface : 0 rest : 5215 --> FOAM Warning : Displacement (-0.0008681076961 -0.0001581150887 2.116792298e-05) at mesh point 116252 coord (3.338612728 -0.2042419776 0.4513001646) points through the surrounding patch faces Smoothing displacement ... Iteration 0 Iteration 10 Iteration 20 Displacement smoothed in = 0.44 s Moving mesh ... Iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Successfully moved mesh Moved mesh in = 0.76 s Morph iteration 2 ----------------- Calculating patchDisplacement as distance to nearest surface point ... Wanted displacement : average:0.0103323957 min:3.389899385e-06 max:0.05502231045 Calculated surface displacement in = 0.04 s Detecting near surfaces ... Overriding nearest with intersection of close gaps at 1797 out of 5215 points. Overriding displacement on features : implicit features : false explicit features : true multi-patch features : false Detected 212 baffle edges out of 10468 edges. Initially selected 2473 points out of 5215 for reverse attraction. Selected 4169 points out of 5215 for reverse attraction. Stringing feature edges : changed 0 points Attraction: linear : max:(-0.02960926869 -0.04243074581 -0.01871837772) avg:(-0.0002556187957 0.0002721533697 0.0005206590622) feature : max:(0 0 0) avg:(0 0 0) Feature analysis : total master points:5215 attraction to : feature point : 0 feature edge : 0 nearest surface : 0 rest : 5215 --> FOAM Warning : Displacement (-0.001201739087 -0.0002189376615 3.523620896e-05) at mesh point 116252 coord (3.33774462 -0.2044000927 0.4513213325) points through the surrounding patch faces Smoothing displacement ... Iteration 0 Iteration 10 Iteration 20 Displacement smoothed in = 0.63 s Moving mesh ... Iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Successfully moved mesh Moved mesh in = 0.97 s Morph iteration 3 ----------------- Calculating patchDisplacement as distance to nearest surface point ... Wanted displacement : average:0.009025501295 min:1.175111223e-06 max:0.05244468213 Calculated surface displacement in = 0.04 s Detecting near surfaces ... Overriding nearest with intersection of close gaps at 1919 out of 5215 points. Overriding displacement on features : implicit features : false explicit features : true multi-patch features : false Detected 217 baffle edges out of 10468 edges. Initially selected 2478 points out of 5215 for reverse attraction. Selected 4159 points out of 5215 for reverse attraction. Stringing feature edges : changed 0 points Attraction: linear : max:(-0.02704174243 -0.0404363962 -0.01959813035) avg:(-0.0002110014585 0.0002007039686 0.0004646880934) feature : max:(0 0 0) avg:(0 0 0) Feature analysis : total master points:5215 attraction to : feature point : 0 feature edge : 0 nearest surface : 0 rest : 5215 --> FOAM Warning : Displacement (-0.001323458952 -0.0002680887324 9.815248402e-05) at mesh point 116252 coord (3.336542881 -0.2046190303 0.4513565687) points through the surrounding patch faces Smoothing displacement ... Iteration 0 Iteration 10 Iteration 20 Displacement smoothed in = 0.44 s Moving mesh ... Iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Successfully moved mesh Moved mesh in = 0.72 s Morph iteration 4 ----------------- Calculating patchDisplacement as distance to nearest surface point ... Wanted displacement : average:0.007443201518 min:1.289523749e-08 max:0.04920201252 Calculated surface displacement in = 0.03 s Detecting near surfaces ... Overriding nearest with intersection of close gaps at 2048 out of 5215 points. Overriding displacement on features : implicit features : false explicit features : true multi-patch features : false Detected 226 baffle edges out of 10468 edges. Initially selected 2458 points out of 5215 for reverse attraction. Selected 4133 points out of 5215 for reverse attraction. Stringing feature edges : changed 0 points Attraction: linear : max:(-0.02476106216 -0.01656549839 0.04511144537) avg:(-0.0001915573312 0.0001296146352 0.0004014125415) feature : max:(0 0 0) avg:(0 0 0) Feature analysis : total master points:5215 attraction to : feature point : 0 feature edge : 0 nearest surface : 0 rest : 5215 --> FOAM Warning : Displacement (-0.001245740254 -0.0003854715255 0.0001405203139) at mesh point 116252 coord (3.335219422 -0.2048871191 0.4514547212) points through the surrounding patch faces Smoothing displacement ... Iteration 0 Iteration 10 Iteration 20 Displacement smoothed in = 0.42 s Moving mesh ... Iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 3 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Iteration 1 Moving mesh using displacement scaling : min:0.75 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 1 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Iteration 2 Moving mesh using displacement scaling : min:0.5625 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 1 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Iteration 3 Moving mesh using displacement scaling : min:0.421875 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 1 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Iteration 4 Moving mesh using displacement scaling : min:0.31640625 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 1 faces on cells with determinant < 0.001 : 0 Iteration 5 Displacement scaling for error reduction set to 0. Moving mesh using displacement scaling : min:0.2373046875 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Successfully moved mesh Moved mesh in = 2.17 s Morph iteration 5 ----------------- Calculating patchDisplacement as distance to nearest surface point ... Wanted displacement : average:0.005788131394 min:1.254637718e-06 max:0.0486346872 Calculated surface displacement in = 0.03 s Detecting near surfaces ... Overriding nearest with intersection of close gaps at 2101 out of 5215 points. Overriding displacement on features : implicit features : false explicit features : true multi-patch features : false Detected 245 baffle edges out of 10468 edges. Initially selected 2428 points out of 5215 for reverse attraction. Selected 4149 points out of 5215 for reverse attraction. Stringing feature edges : changed 0 points Attraction: linear : max:(-0.01257559977 0.04410564561 -0.01618267948) avg:(-0.0001103977071 4.65826854e-05 0.000290411883) feature : max:(0 0 0) avg:(0 0 0) Feature analysis : total master points:5215 attraction to : feature point : 0 feature edge : 0 nearest surface : 0 rest : 5215 --> FOAM Warning : Displacement (-0.000860211639 -0.0004936718093 0.0002319217536) at mesh point 116252 coord (3.333973682 -0.2052725906 0.4515952415) points through the surrounding patch faces Smoothing displacement ... Iteration 0 Iteration 10 Iteration 20 Displacement smoothed in = 0.45 s Moving mesh ... Iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 1 faces with face-decomposition tet quality < 1e-15 : 6 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 1 faces on cells with determinant < 0.001 : 0 Iteration 1 Moving mesh using displacement scaling : min:0.75 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 4 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 3 faces on cells with determinant < 0.001 : 0 Iteration 2 Moving mesh using displacement scaling : min:0.5625 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 2 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 1 faces on cells with determinant < 0.001 : 0 Iteration 3 Moving mesh using displacement scaling : min:0.421875 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 1 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Iteration 4 Moving mesh using displacement scaling : min:0.31640625 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 1 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Iteration 5 Displacement scaling for error reduction set to 0. Moving mesh using displacement scaling : min:0.2373046875 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 1 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Iteration 6 Moving mesh using displacement scaling : min:0 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Successfully moved mesh Moved mesh in = 1.89 s Morph iteration 6 ----------------- Calculating patchDisplacement as distance to nearest surface point ... Wanted displacement : average:0.00432268627 min:7.660176095e-07 max:0.04780741127 Calculated surface displacement in = 0.03 s Detecting near surfaces ... Overriding nearest with intersection of close gaps at 2127 out of 5215 points. Overriding displacement on features : implicit features : false explicit features : true multi-patch features : false Detected 249 baffle edges out of 10468 edges. Initially selected 2462 points out of 5215 for reverse attraction. Selected 4099 points out of 5215 for reverse attraction. Stringing feature edges : changed 0 points Attraction: linear : max:(-0.0279364931 -0.01616594606 0.04440214221) avg:(-5.488374211e-05 -1.279008997e-05 0.0001801319083) feature : max:(0 0 0) avg:(0 0 0) Feature analysis : total master points:5215 attraction to : feature point : 0 feature edge : 0 nearest surface : 0 rest : 5215 --> FOAM Warning : Displacement (-0.0003379501549 -0.0005475383014 0.000380226881) at mesh point 116252 coord (3.33311347 -0.2057662624 0.4518271633) points through the surrounding patch faces Smoothing displacement ... Iteration 0 Iteration 10 Iteration 20 Displacement smoothed in = 0.47 s Moving mesh ... Iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 2 faces with face-decomposition tet quality < 1e-15 : 13 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 1 faces on cells with determinant < 0.001 : 0 Iteration 1 Moving mesh using displacement scaling : min:0.75 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 2 faces with face-decomposition tet quality < 1e-15 : 9 faces with concavity > 80 degrees : 1 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 2 faces on cells with determinant < 0.001 : 0 Iteration 2 Moving mesh using displacement scaling : min:0.5625 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 1 faces with face-decomposition tet quality < 1e-15 : 8 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 2 faces on cells with determinant < 0.001 : 0 Iteration 3 Moving mesh using displacement scaling : min:0.421875 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 1 faces with face-decomposition tet quality < 1e-15 : 5 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 2 faces on cells with determinant < 0.001 : 0 Iteration 4 Moving mesh using displacement scaling : min:0.31640625 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 1 faces with face-decomposition tet quality < 1e-15 : 4 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 1 faces on cells with determinant < 0.001 : 0 Iteration 5 Displacement scaling for error reduction set to 0. Moving mesh using displacement scaling : min:0.2373046875 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 1 faces with face-decomposition tet quality < 1e-15 : 2 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Iteration 6 Moving mesh using displacement scaling : min:0 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Successfully moved mesh Moved mesh in = 1.78 s Morph iteration 7 ----------------- Calculating patchDisplacement as distance to nearest surface point ... Wanted displacement : average:0.00315336575 min:2.010069462e-07 max:0.04629615504 Calculated surface displacement in = 0.01 s Detecting near surfaces ... Overriding nearest with intersection of close gaps at 2123 out of 5215 points. Overriding displacement on features : implicit features : false explicit features : true multi-patch features : false Detected 259 baffle edges out of 10468 edges. Initially selected 2441 points out of 5215 for reverse attraction. Selected 4053 points out of 5215 for reverse attraction. Stringing feature edges : changed 0 points Attraction: linear : max:(0.06721428422 0.009151996848 -0.007370062156) avg:(-5.149799406e-05 -1.994993557e-05 7.933093523e-05) feature : max:(0 0 0) avg:(0 0 0) Feature analysis : total master points:5215 attraction to : feature point : 0 feature edge : 0 nearest surface : 0 rest : 5215 --> FOAM Warning : Displacement (-0.0003327095562 -0.0006462027819 0.0004321731815) at mesh point 116252 coord (3.332780175 -0.2063062591 0.4522021531) points through the surrounding patch faces Smoothing displacement ... Iteration 0 Iteration 10 Iteration 20 Displacement smoothed in = 0.26 s Moving mesh ... Iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 4 faces with face-decomposition tet quality < 1e-15 : 40 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 4 faces on cells with determinant < 0.001 : 0 Iteration 1 Moving mesh using displacement scaling : min:0.75 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 2 faces with face-decomposition tet quality < 1e-15 : 27 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 4 faces on cells with determinant < 0.001 : 0 Iteration 2 Moving mesh using displacement scaling : min:0.5625 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 2 faces with face-decomposition tet quality < 1e-15 : 21 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 4 faces on cells with determinant < 0.001 : 0 Iteration 3 Moving mesh using displacement scaling : min:0.421875 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 1 faces with face-decomposition tet quality < 1e-15 : 15 faces with concavity > 80 degrees : 1 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 3 faces on cells with determinant < 0.001 : 0 Iteration 4 Moving mesh using displacement scaling : min:0.31640625 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 1 faces with face-decomposition tet quality < 1e-15 : 10 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 7 faces on cells with determinant < 0.001 : 0 Iteration 5 Displacement scaling for error reduction set to 0. Moving mesh using displacement scaling : min:0.2373046875 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 1 faces with face-decomposition tet quality < 1e-15 : 8 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 3 faces on cells with determinant < 0.001 : 0 Iteration 6 Moving mesh using displacement scaling : min:0 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Successfully moved mesh Moved mesh in = 1.53 s Morph iteration 8 ----------------- Calculating patchDisplacement as distance to nearest surface point ... Wanted displacement : average:0.002329623341 min:4.780199961e-07 max:0.04473087337 Calculated surface displacement in = 0.02 s Detecting near surfaces ... Overriding nearest with intersection of close gaps at 2152 out of 5215 points. Overriding displacement on features : implicit features : false explicit features : true multi-patch features : false Detected 295 baffle edges out of 10468 edges. Initially selected 2434 points out of 5215 for reverse attraction. Selected 4002 points out of 5215 for reverse attraction. Stringing feature edges : changed 0 points Attraction: linear : max:(-0.02166306815 -0.02098077023 0.04928848292) avg:(-8.821585087e-05 -4.014689253e-05 8.705400174e-05) feature : max:(0 0 0) avg:(0 0 0) Feature analysis : total master points:5215 attraction to : feature point : 0 feature edge : 0 nearest surface : 0 rest : 5215 --> FOAM Warning : Displacement (-0.0003568142926 -0.0007575618245 0.0005638778021) at mesh point 116252 coord (3.332560453 -0.2067330125 0.4524875609) points through the surrounding patch faces Smoothing displacement ... Iteration 0 Iteration 10 Iteration 20 Displacement smoothed in = 0.3 s Moving mesh ... Iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 7 faces with face-decomposition tet quality < 1e-15 : 69 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 7 faces on cells with determinant < 0.001 : 0 Iteration 1 Moving mesh using displacement scaling : min:0.75 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 5 faces with face-decomposition tet quality < 1e-15 : 52 faces with concavity > 80 degrees : 1 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 6 faces on cells with determinant < 0.001 : 0 Iteration 2 Moving mesh using displacement scaling : min:0.5625 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 3 faces with face-decomposition tet quality < 1e-15 : 41 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 3 faces on cells with determinant < 0.001 : 0 Iteration 3 Moving mesh using displacement scaling : min:0.421875 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 3 faces with face-decomposition tet quality < 1e-15 : 37 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 3 faces on cells with determinant < 0.001 : 0 Iteration 4 Moving mesh using displacement scaling : min:0.31640625 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 1 faces with face-decomposition tet quality < 1e-15 : 32 faces with concavity > 80 degrees : 1 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 3 faces on cells with determinant < 0.001 : 0 Iteration 5 Displacement scaling for error reduction set to 0. Moving mesh using displacement scaling : min:0.2373046875 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 1 faces with face-decomposition tet quality < 1e-15 : 22 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 10 faces on cells with determinant < 0.001 : 0 Iteration 6 Moving mesh using displacement scaling : min:0 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Successfully moved mesh Moved mesh in = 2.63 s Morph iteration 9 ----------------- Calculating patchDisplacement as distance to nearest surface point ... Wanted displacement : average:0.001840448283 min:4.007514099e-08 max:0.04285425209 Calculated surface displacement in = 0.02 s Detecting near surfaces ... Overriding nearest with intersection of close gaps at 2159 out of 5215 points. Overriding displacement on features : implicit features : false explicit features : true multi-patch features : false Detected 319 baffle edges out of 10468 edges. Initially selected 2436 points out of 5215 for reverse attraction. Selected 4000 points out of 5215 for reverse attraction. Stringing feature edges : changed 0 points Attraction: linear : max:(-0.02166306815 -0.02098077023 0.04928848292) avg:(-6.969655115e-05 -2.04821359e-05 5.990098754e-05) feature : max:(0 0 0) avg:(0 0 0) Feature analysis : total master points:5215 attraction to : feature point : 0 feature edge : 0 nearest surface : 0 rest : 5215 --> FOAM Warning : Displacement (-6.017214058e-05 1.433925078e-05 -1.662988563e-06) at mesh point 116252 coord (3.332325626 -0.2072315801 0.452858661) points through the surrounding patch faces Smoothing displacement ... Iteration 0 Iteration 10 Iteration 20 Displacement smoothed in = 0.36 s Moving mesh ... Iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 2 faces with face pyramid volume < 1e-13 : 19 faces with face-decomposition tet quality < 1e-15 : 122 faces with concavity > 80 degrees : 4 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 6 faces on cells with determinant < 0.001 : 0 Iteration 1 Moving mesh using displacement scaling : min:0.75 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 15 faces with face-decomposition tet quality < 1e-15 : 93 faces with concavity > 80 degrees : 1 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 6 faces on cells with determinant < 0.001 : 0 Iteration 2 Moving mesh using displacement scaling : min:0.5625 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 11 faces with face-decomposition tet quality < 1e-15 : 70 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 8 faces on cells with determinant < 0.001 : 0 Iteration 3 Moving mesh using displacement scaling : min:0.421875 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 6 faces with face-decomposition tet quality < 1e-15 : 64 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 8 faces on cells with determinant < 0.001 : 0 Iteration 4 Moving mesh using displacement scaling : min:0.31640625 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 2 faces with face-decomposition tet quality < 1e-15 : 47 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 12 faces on cells with determinant < 0.001 : 0 Iteration 5 Displacement scaling for error reduction set to 0. Moving mesh using displacement scaling : min:0.2373046875 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 2 faces with face-decomposition tet quality < 1e-15 : 33 faces with concavity > 80 degrees : 1 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 12 faces on cells with determinant < 0.001 : 0 Iteration 6 Moving mesh using displacement scaling : min:0 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Successfully moved mesh Moved mesh in = 2.16 s Repatching faces according to nearest surface ... Repatched 0 faces in = 0.03 s Edge intersection testing: Number of edges : 332222 Number of edges to retest : 79046 Number of intersected edges : 4865 Merging 520 sets of faces. Edge intersection testing: Number of edges : 331520 Number of edges to retest : 2142 Number of intersected edges : 4206 Undo iteration 0 ---------------- Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 1 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Masters that need to be restored:1 Edge intersection testing: Number of edges : 331522 Number of edges to retest : 6 Number of intersected edges : 4208 Undo iteration 1 ---------------- Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Merging all points on surface that - are used by only two boundary faces and - make an angle with a cosine of more than 0.8660254038. Removing 268 straight edge points ... Edge intersection testing: Number of edges : 331522 Number of edges to retest : 1485 Number of intersected edges : 4205 Undo iteration 0 ---------------- Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Snapped mesh : cells:106470 faces:331522 points:118840 Cells per refinement level: 0 98070 1 8400 Writing mesh to time constant Wrote mesh in = 2.18 s. Mesh snapped in = 25.23 s. Shrinking and layer addition phase ---------------------------------- Using mesh parameters { maxNonOrtho 65; maxBoundarySkewness 20; maxInternalSkewness 4; maxConcave 80; minFlatness 0.5; minVol 1e-13; minTetQuality 1e-15; minArea -1; minTwist 0.02; minDeterminant 0.001; minFaceWeight 0.05; minVolRatio 0.01; minTriangleTwist -1; nSmoothScale 4; errorReduction 0.75; relaxed { maxNonOrtho 75; } } Merging all faces of a cell --------------------------- - which are on the same patch - which make an angle < 130 degrees (cos:-0.6427876097) - as long as the resulting face doesn't become concave by more than 90 degrees (0=straight, 180=fully concave) Merging 493 sets of faces. Edge intersection testing: Number of edges : 330900 Number of edges to retest : 2065 Number of intersected edges : 3547 Undo iteration 0 ---------------- Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 13 faces with concavity > 80 degrees : 22 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Masters that need to be restored:33 Edge intersection testing: Number of edges : 330937 Number of edges to retest : 191 Number of intersected edges : 3589 Undo iteration 1 ---------------- Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Merging all points on surface that - are used by only two boundary faces and - make an angle with a cosine of more than -0.6427876097. Removing 333 straight edge points ... Edge intersection testing: Number of edges : 330937 Number of edges to retest : 1826 Number of intersected edges : 3562 Undo iteration 0 ---------------- Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 7 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Detected 1 error faces on boundaries that have been merged. These will be restored to their original faces. Edge intersection testing: Number of edges : 330937 Number of edges to retest : 5 Number of intersected edges : 3562 Undo iteration 1 ---------------- Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 6 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Detected 0 error faces on boundaries that have been merged. These will be restored to their original faces. Detected 6 error faces in mesh. Restoring neighbours of faces in error. Edge intersection testing: Number of edges : 330937 Number of edges to retest : 224 Number of intersected edges : 3563 Checking mesh manifoldness ... Outside of mesh is multiply connected across edges or points. This is not a fatal error but might cause some unexpected behaviour. Checking initial mesh ... Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Detected 0 illegal faces (concave, zero area or negative cell pyramid volume) Adding in total 0 inter-processor patches to handle extrusion of non-manifold processor boundaries. Handling points with inconsistent layer specification ... Handling non-manifold points ... Checking patch manifoldness ... Outside of local patch is multiply connected across edges or points at 2 points. Set displacement to zero for all 2 non-manifold points Handling feature edges ... Handling cells with warped patch faces ... Set displacement to zero on 169 warped faces since layer would be > 0.5 of the size of the bounding box. patch faces layers avg thickness[m] near-wall overall ----- ----- ------ --------- ------- ford_modified_3 3938 2 0.0175 0.0301 Selecting externalDisplacementMeshMover displacementMedialAxis displacementMedialAxis : Calculating distance to Medial Axis ... displacementMedialAxis : Smoothing normals ... Iteration 0 residual 0.1824368372 displacementMedialAxis : Inserting points on patch ffminx if angle to nearest layer patch > 30 degrees. displacementMedialAxis : Inserting points on patch ffmaxx if angle to nearest layer patch > 30 degrees. displacementMedialAxis : Inserting points on patch ffminy if angle to nearest layer patch > 30 degrees. displacementMedialAxis : Inserting points on patch ffmaxy if angle to nearest layer patch > 30 degrees. displacementMedialAxis : Inserting points on patch ffminz if angle to nearest layer patch > 30 degrees. displacementMedialAxis : Inserting points on patch ffmaxz if angle to nearest layer patch > 30 degrees. displacementMedialAxis : Smoothing normals in interior ... Iteration 0 residual 0.08929569055 Layer addition iteration 0 -------------------------- Determining displacement for added points according to pointNormal ... Detected 45 points with point normal pointing through faces. Reset displacement at 45 points to average of surrounding points. displacementMedialAxis : Smoothing using Medial Axis ... displacementMedialAxis : Reducing layer thickness at 582 nodes where thickness to medial axis distance is large displacementMedialAxis : Removing isolated regions ... displacementMedialAxis : Number of isolated points extrusion stopped : 1012 displacementMedialAxis : Smoothing field ... Iteration 0 residual 0.0009072541247 displacementMedialAxis : Moving mesh ... displacementMedialAxis : Iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 29 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 displacementMedialAxis : Iteration 1 Moving mesh using displacement scaling : min:0.75 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 23 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 displacementMedialAxis : Iteration 2 Moving mesh using displacement scaling : min:0.5625 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 16 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 displacementMedialAxis : Iteration 3 Moving mesh using displacement scaling : min:0.421875 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 15 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 1 faces on cells with determinant < 0.001 : 0 displacementMedialAxis : Iteration 4 Moving mesh using displacement scaling : min:0.31640625 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 14 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 1 faces on cells with determinant < 0.001 : 0 displacementMedialAxis : Iteration 5 displacementMedialAxis : Displacement scaling for error reduction set to 0. Moving mesh using displacement scaling : min:0.2373046875 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 12 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 displacementMedialAxis : Iteration 6 Moving mesh using displacement scaling : min:0 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 1 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 displacementMedialAxis : Iteration 7 Moving mesh using displacement scaling : min:0 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 displacementMedialAxis : Successfully moved mesh displacementMedialAxis : Finished moving mesh ... truncateDisplacement : Unextruded 7 faces due to non-consecutive vertices being extruded. truncateDisplacement : Unextruded 0 faces due to stringed edges with inconsistent extrusion. truncateDisplacement : Unextruded 1 faces due to non-consecutive vertices being extruded. truncateDisplacement : Unextruded 0 faces due to stringed edges with inconsistent extrusion. truncateDisplacement : Unextruded 0 faces due to non-consecutive vertices being extruded. truncateDisplacement : Unextruded 0 faces due to stringed edges with inconsistent extrusion. Setting up information for layer truncation ... Checking mesh with layer ... Checking faces in error : non-orthogonality > 65 degrees : 9 faces with face pyramid volume < 1e-13 : 6 faces with face-decomposition tet quality < 1e-15 : 254 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 1 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 6 faces on cells with determinant < 0.001 : 0 Detected 276 illegal faces (concave, zero area or negative cell pyramid volume) Extruding 2367 out of 3938 faces (60.10665312%). Removed extrusion at 169 faces. Added 4601 out of 7876 cells (58.41797867%). Layer addition iteration 1 -------------------------- Determining displacement for added points according to pointNormal ... Detected 0 points with point normal pointing through faces. Reset displacement at 0 points to average of surrounding points. displacementMedialAxis : Smoothing using Medial Axis ... displacementMedialAxis : Reducing layer thickness at 153 nodes where thickness to medial axis distance is large displacementMedialAxis : Removing isolated regions ... displacementMedialAxis : Number of isolated points extrusion stopped : 170 displacementMedialAxis : Smoothing field ... Iteration 0 residual 0.0005352482502 displacementMedialAxis : Moving mesh ... displacementMedialAxis : Iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 3 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 displacementMedialAxis : Iteration 1 Moving mesh using displacement scaling : min:0.75 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 2 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 displacementMedialAxis : Iteration 2 Moving mesh using displacement scaling : min:0.5625 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 displacementMedialAxis : Successfully moved mesh displacementMedialAxis : Finished moving mesh ... truncateDisplacement : Unextruded 1 faces due to non-consecutive vertices being extruded. truncateDisplacement : Unextruded 0 faces due to stringed edges with inconsistent extrusion. truncateDisplacement : Unextruded 0 faces due to non-consecutive vertices being extruded. truncateDisplacement : Unextruded 0 faces due to stringed edges with inconsistent extrusion. Setting up information for layer truncation ... Checking mesh with layer ... Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 16 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Detected 16 illegal faces (concave, zero area or negative cell pyramid volume) Extruding 2026 out of 3938 faces (51.44743525%). Removed extrusion at 14 faces. Added 3593 out of 7876 cells (45.61960386%). Layer addition iteration 2 -------------------------- Determining displacement for added points according to pointNormal ... Detected 0 points with point normal pointing through faces. Reset displacement at 0 points to average of surrounding points. displacementMedialAxis : Smoothing using Medial Axis ... displacementMedialAxis : Reducing layer thickness at 99 nodes where thickness to medial axis distance is large displacementMedialAxis : Removing isolated regions ... displacementMedialAxis : Number of isolated points extrusion stopped : 11 displacementMedialAxis : Smoothing field ... Iteration 0 residual 0.0005045025423 displacementMedialAxis : Moving mesh ... displacementMedialAxis : Iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 displacementMedialAxis : Successfully moved mesh displacementMedialAxis : Finished moving mesh ... truncateDisplacement : Unextruded 0 faces due to non-consecutive vertices being extruded. truncateDisplacement : Unextruded 0 faces due to stringed edges with inconsistent extrusion. Setting up information for layer truncation ... Checking mesh with layer ... Checking faces in error : non-orthogonality > 65 degrees : 1 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 2 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 1 faces on cells with determinant < 0.001 : 0 Detected 4 illegal faces (concave, zero area or negative cell pyramid volume) Extruding 1998 out of 3938 faces (50.73641442%). Removed extrusion at 4 faces. Added 3529 out of 7876 cells (44.80700863%). Layer addition iteration 3 -------------------------- Determining displacement for added points according to pointNormal ... Detected 0 points with point normal pointing through faces. Reset displacement at 0 points to average of surrounding points. displacementMedialAxis : Smoothing using Medial Axis ... displacementMedialAxis : Reducing layer thickness at 98 nodes where thickness to medial axis distance is large displacementMedialAxis : Removing isolated regions ... displacementMedialAxis : Number of isolated points extrusion stopped : 2 displacementMedialAxis : Smoothing field ... Iteration 0 residual 0.0005025033857 displacementMedialAxis : Moving mesh ... displacementMedialAxis : Iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 displacementMedialAxis : Successfully moved mesh displacementMedialAxis : Finished moving mesh ... truncateDisplacement : Unextruded 0 faces due to non-consecutive vertices being extruded. truncateDisplacement : Unextruded 0 faces due to stringed edges with inconsistent extrusion. Setting up information for layer truncation ... Checking mesh with layer ... Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 1 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Detected 1 illegal faces (concave, zero area or negative cell pyramid volume) Extruding 1993 out of 3938 faces (50.60944642%). Removed extrusion at 1 faces. Added 3515 out of 7876 cells (44.62925343%). Layer addition iteration 4 -------------------------- Determining displacement for added points according to pointNormal ... Detected 0 points with point normal pointing through faces. Reset displacement at 0 points to average of surrounding points. displacementMedialAxis : Smoothing using Medial Axis ... displacementMedialAxis : Reducing layer thickness at 98 nodes where thickness to medial axis distance is large displacementMedialAxis : Removing isolated regions ... displacementMedialAxis : Number of isolated points extrusion stopped : 0 displacementMedialAxis : Smoothing field ... Iteration 0 residual 0.0005020600189 displacementMedialAxis : Moving mesh ... displacementMedialAxis : Iteration 0 Moving mesh using displacement scaling : min:1 max:1 Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 displacementMedialAxis : Successfully moved mesh displacementMedialAxis : Finished moving mesh ... truncateDisplacement : Unextruded 0 faces due to non-consecutive vertices being extruded. truncateDisplacement : Unextruded 0 faces due to stringed edges with inconsistent extrusion. Setting up information for layer truncation ... Checking mesh with layer ... Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Detected 0 illegal faces (concave, zero area or negative cell pyramid volume) Extruding 1993 out of 3938 faces (50.60944642%). Removed extrusion at 0 faces. Added 3513 out of 7876 cells (44.60385983%). Edge intersection testing: Number of edges : 341501 Number of edges to retest : 0 Number of intersected edges : 6912 patch faces layers overall thickness [m] [%] ----- ----- ------ --- --- ford_modified_3 3938 0.892 0.0129 36.5 Layer mesh : cells:109983 faces:341501 points:121951 Cells per refinement level: 0 98070 1 11913 Writing mesh to time constant Wrote mesh in = 10.51 s. Layers added in = 10.51 s. Checking final mesh ... Checking faces in error : non-orthogonality > 65 degrees : 0 faces with face pyramid volume < 1e-13 : 0 faces with face-decomposition tet quality < 1e-15 : 0 faces with concavity > 80 degrees : 0 faces with skewness > 4 (internal) or 20 (boundary) : 0 faces with interpolation weights (0..1) < 0.05 : 0 faces with volume ratio of neighbour cells < 0.01 : 0 faces with face twist < 0.02 : 0 faces on cells with determinant < 0.001 : 0 Finished meshing without any errors Finished meshing in = 51.29 s. End